SA-RIO-SW-02 Wifi Controlled Remote I/O Module (12 I/O)

SA-RIO-SW-02 is a device that utilizes WiFi to receive / send signal from / to the host (AMR system) and trigger On / Off of the output device that physically connected to it. This is the easiest way to link third party devices to AMR system wirelessly.

Features:

Easy to install: The Wifi Controlled Remote I/O Module has an easy configuration that can be installed on a desired device or infrastructure.
Flexible: It is easily implemented and adapted on devices required to communicate with your AGVs.
Efficient: Signals from the Wifi Controlled Remote I/O Module are transmitted seamlessly between the Fleet Management System and a particular device or infrastructure. The speedy sending and receiving of signals ensures that your workflow remains efficient at all times.
Large number of I/O ports: There are 12 input and output ports provided, giving you a large control over how you want to execute the desired control system.

Infrastructure:

Features:

Dimension
Length	400 mm
Width	150 mm
Height	350 mm
Identification
Interface	WIFI
Supported Wireless Frequency Band	2.4 GHz
Maximum Number Of Controlled Device Using FMS	10
Maximum Input	12
Digital Input Logic Level	Dry Contact (Default) Logic level 1: close to DI COM Logic level 0: open Wet Contact Logic level 1: 10~30 VDC (0.8 mA max.) Logic level 0: 0~3 VDC (3 mA min.)
Isolation	3000 Vrms
Maximum Output	12
Output Contact Rating	3 A@ 30 VDC, 5A @ 250VAC
Operating System	NavWiz
Contact Rating	5 A
Protocol	Modbus/TCP, TCP/IP, DHCP, HTTP
Input Voltage	115~230 VAC
Input/Output Configuration	Output Sourcing 1A@24VDC *Total output current must not be more than 1A
Environment
Operating Environment	-40~70 °C / -40~158 °F
Humidity	0~95 % (non-condensing)
Storage Temperature	-40~85 °C/ -40~185 °F