Payload Handler: Lifting
Payload Handler: Towing – Lifting – Hooking
Payload Handler: Lifting
Payload Handler: Lifting
Payload Handler: Direct
GA-MS-S-50
GA-REF-S
SA-RIO-SW
SA-RIO-CW
SA-HG-TG
DFLEET
The LAN Controlled Compact Remote I/O Module is a device used to easily link third party devices to AMR system. Signals can be sent and received from a connected door, machine, gate, light, alarm and etc through its provided I/O.
SA-RIO-CL-01 is a device that receive / send signal from / to the host (AMR system) and trigger On / Off of the output device that physically connected to it. This is the easiest way to link third party devices to AMR system wirelessly.
Features:
Infrastructure:
Features:
| Basic Information – Housing | |
|---|---|
| Length | 271 mm |
| Width | 131 mm |
| Height | 173 mm |
| Basic Information – Housing with Mounting Plate | |
| Length | 338 mm |
| Width | 150 mm |
| Height | 301 mm |
| Weight | 4.2 kg |
| Identification | |
| Interface | 1 x RJ45 (Ethernet) |
| Maximum number of controlled device using FMS | 30 |
| Maximum input | 4 |
| Digital Input Logic Level | Logic level 0: open Logic level 0: 0~3 VDC (3 mA min.) |
| Isolation | 3000 Vrms |
| Maximum output | 4 |
| Output Contact Rating | 3 A@ 30 VDC, 5A @ 250VAC |
| Operating system | NavWiz |
| Contact rating | 5 A |
| Protocol | Modbus/TCP, TCP/IP, DHCP, HTTP |
| Input Voltage | 115~230 VAC |
| Input/Output Configuration | Output Sourcing 1A@24VDC *Total output current must not be more than 1A |
| Environment | |
| Operating Environment | -40~70 °C / -40~158 °F |
| Humidity | 0~95 % (non-condensing) |
| Storage Temperature | -40~85 °C / -40~185 °F |
SA-RIO-CL-01 Datasheet
